BALDOR S21-CWS0-0145 Rpm Xpnv Submersible Pump Motor 1800 575-V 180TY S18-CWS0-0177

( Brand: Baldor ), ( Manufacturer Part Number: S21-CWS0-0145 ), ( Part Type: Hp Pump Motor ), ( Actual Rated Input Voltage: 575 ), ( Ac Frequency Rating: 60 Hz ), ( Ac Phase: Three Phase ), ( Enclosure Type: Xpnv ), ( Base Rpm: 1800 ), ( Current Type: Ac ), ( Nema Frame: 180ty )

Review BALDOR Hp 1800 Rpm Xpnv 575 Submersible Pump Motor Ph

The **Baldor S21-CWS0-0145 HP 1800 RPM XPNV 575 180TY Submersible Pump Motor (paired with the S18-CWS0-0177 pump)** represents a robust and high-performance solution for demanding fluid transfer applications, engineered to deliver reliability, efficiency, and durability in challenging environments. This motor is part of Baldor s premium **XPNV** series, designed specifically for submersible pump systems where consistent performance under continuous load is critical. With a **1.5 horsepower (HP) output**, this motor operates at a standard speed of **1800 revolutions per minute (RPM)**, striking an optimal balance between torque and speed to ensure smooth and efficient operation across a wide range of industrial, municipal, and commercial applications. The **575-volt (V) single-phase electrical rating** makes it compatible with standard power grids, while the **180TY frame size** provides a compact yet sturdy construction, allowing for seamless integration into existing pump systems without compromising on performance.

One of the standout features of this motor is its **sealed, submersible design**, which ensures protection against water ingress, dust, and corrosive elements making it ideal for use in wells, sewage systems, irrigation networks, and other submerged applications where exposure to harsh conditions is inevitable. The **S18-CWS0-0177 pump pairing** is specifically matched to this motor, forming a cohesive unit that maximizes hydraulic efficiency while minimizing energy consumption. The motor s **explosion-proof and corrosion-resistant construction**, often achieved through materials like stainless steel or high-grade aluminum alloys, enhances its longevity and reduces maintenance requirements, even in aggressive chemical or saline environments. Additionally, the **XPNV series** incorporates advanced bearing and seal technologies, including **mechanical seals and labyrinth designs**, which significantly extend the motor s operational life by preventing premature wear and fluid leakage.

Beyond its technical specifications, this motor is built with **Baldor s reputation for quality and innovation** in mind, adhering to strict industry standards such as **NEMA and IEEE compliance** for performance consistency and safety. Its **low-vibration and low-noise operation** ensures minimal operational disruptions, while the **high-efficiency motor design** reduces energy costs by optimizing power usage without sacrificing output. Whether deployed in **municipal water supply systems, agricultural irrigation, or industrial wastewater management**, this motor delivers the power and reliability needed to handle heavy-duty fluid transfer tasks with ease. For operators seeking a **long-lasting, high-performance submersible motor solution**, the Baldor S21-CWS0-0145 paired with the S18-CWS0-0177 pump stands as a dependable choice, combining Baldor s engineering excellence with the practicality of a well-matched pump system.

### **Baldor S21-CWS0-0145 HP (1800 RPM) XPNV 575 180TY Submersible Pump Motor (S18-CWS0-0177) Pros and Cons**

1. **High Reliability and Durability** Baldor (now part of Emerson) is a well-known brand in industrial motors, known for robust construction and long service life. These motors are designed for continuous operation in demanding environments, including submersible applications.

2. **Energy Efficiency** The motor is likely designed with energy-saving features, such as premium efficiency standards, which can reduce operational costs over time.

3. **Waterproof and Submersible Rating** The **IP68** (or similar) rating ensures it can operate fully submerged in water, making it ideal for well, sewage, or floodwater pumping applications.

4. **High Horsepower (1 HP) for Submersible Use** The 1 HP rating provides sufficient power for medium-duty pumping tasks, such as lifting water from wells, sump pits, or drainage systems.

5. **Compatibility with Common Pump Systems** The **XPNV 575** designation suggests it is designed to work with standard submersible pump configurations, including vertical shaft and impeller setups.

6. **Low Maintenance Requirements** Submersible motors are generally easier to maintain than surface-mounted motors because they are sealed and protected from external contaminants.

7. **Quiet Operation** Since the motor is submerged, it operates without the noise associated with surface-mounted pumps, which can be beneficial in residential or sensitive environments.

8. **Wide Availability of Parts** As a Baldor product, replacement parts and service support are widely available through industrial distributors and manufacturers.

---

1. **Higher Upfront Cost** Compared to generic or lesser-known brands, Baldor motors typically come at a premium price, which may be a barrier for budget-conscious buyers.

2. **Specialized Installation Requirements** Submersible motors require careful installation, including proper sealing, electrical connections, and alignment with the pump shaft. Improper installation can lead to premature failure.

3. **Limited Mobility** Once installed in a well or sump, removing or relocating the motor can be difficult and costly, especially if the system is deep or in a confined space.

4. **Potential for Overloading** If the motor is paired with a pump that exceeds its rated capacity (e.g., a larger impeller or higher head pressure), it may overheat or fail prematurely.

5. **Dependence on Water Quality** If the water contains abrasive particles (e.g., sand, silt), the motor s seals and bearings may wear out faster, reducing lifespan.

6. **Electrical Compatibility Concerns** The motor must match the voltage and phase requirements of the local power supply. Mismatches can cause damage or inefficiency.

7. **Service Challenges in Remote Locations** If the motor fails in a hard-to-reach area (e.g., a deep well), repair or replacement may require specialized equipment and labor.

8. **Potential for Corrosion in Aggressive Environments** While sealed, prolonged exposure to highly corrosive water (e.g., brackish or acidic) can degrade internal components over time.

---

The **Baldor S21-CWS0-0145 HP (1800 RPM) submersible motor** is a high-quality, reliable choice for medium-duty pumping applications where durability and efficiency are critical. Its robust construction, energy efficiency, and submersible rating make it suitable for well, sump, or drainage systems. However, the higher cost, specialized installation needs, and potential maintenance challenges must be carefully considered.

If budget is not a constraint and the application demands a dependable motor, this Baldor model is an excellent long-term investment. For cost-sensitive buyers or less demanding applications, a lower-cost alternative (e.g., a well-known generic brand) might suffice, but with a shorter expected lifespan.

---

- You need a **long-lasting, high-performance** solution for a **well, sump, or drainage pump**.

- Your application involves **moderate to high water flow** (1 HP is adequate for most residential/commercial needs).

- You prioritize **reliability and efficiency** over upfront cost savings.

- You have access to **proper installation and maintenance support**.

- Your budget is tight, and you can find a **comparable generic motor** with similar specs at a lower price.

- The application is **low-duty** (e.g., occasional use), and a smaller motor (e.g., HP) would suffice.

- You require **easy mobility or frequent relocations**, as submersible motors are less portable.

For most **residential well or sump pump systems**, this Baldor motor is a **strong, well-supported choice** that balances performance and longevity. Always verify **voltage compatibility, pump matching, and installation conditions** before purchase.

Details:

FRAME: 180TY. BEARINGS: 50BC02JPP30A / 25BC02JPG30A. New Surplus BALDOR, Electric Motor. Note: 575 volts - NOT 460.

Designed for use with industrial and municipal wastewater slurry pumps, aerators, mixers other wet pit applications. BALDOR CAT # S21-CWS0-0145. MOUNTING: Nonstandard. Explosion Proof Non Ventilated.

part #: s21cws00145 prices

• $1797.00-$4373.75

specifications momaequ:

• brand: Baldor
• mpn: S21-cws0-0145
• part type: Hp Pump Motor
• actual rated input voltage: 575
• ac frequency rating: 60 Hz
• ac phase: Three Phase
• enclosure type: Xpnv
• base rpm: 1800
• current type: Ac
• nema frame: 180ty

general momaequ:

• condition: New Open box
• Industrial Automation Motion Controls > Electric Motors > Definite Purpose Motors

offer momaequ:

• sold: 0
• quantity: 1
• availability: In Stock
• started: February 18, 2026
• options: Ship-to-home

seller momaequ:

• # reviews: 3432
• city: Hillside, New Jersey
• rating: 100.0%

returns momaequ:

• policy: Returns Accepted
• paid by: Buyer
• method: Money back
• time: 30 Days

payments momaequ:

• credit card: Visa
• wallet: Apple-pay
• other

shipping momaequ:

Baldor S21-CWS0-0145 Is Similar To:

• 1057 Baldor Hp Phase Brake Motor Model (31% similar) New surplus item...(September 7th, 2018)
• 1513 Baldor Reliane Reliance Washdown Motor (26.9% similar) 3 phase 4 hp 1750 rpm see photo of data plate missing original box...(September 28th, 2018)
• 17a20r14 Dodge Baldor Hp Brake Motor Volts Rpm Frame (28% similar) ...(March 23rd, 2019)
• 1nn3530 Baldor Motor With Tigear Reducer (24.4% similar) ...(August 31st, 2018)
• 1q-2018-0031 Baldor Industrial Motor Rpm (29% similar) Baldor 35L15-756 industrial motor, 2HP 1725 rpm lock: motor shelf...(August 7th, 2018)
• 2221405 331734w35 Baldor Industrial Motor (27.3% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(September 22nd, 2017)
• 24e131w013g4 Baldor Industrial Motor Gc24310 (31.1% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(June 22nd, 2017)
• 25e883w417g1 Baldor Inverter Drive Motor (29% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(October 7th, 2017)
• 2674 Baldor Motor (22.2% similar) These items are sold as is and purchased at buyers risk. If the return reason is a buyer mistake or remorse, we ask that pays for shipping. 5HP, 1770RPM, 60HZ shipping arcs will always ship in the most cost-effective and reliable way...(December 6th, 2018)
• 29ux34 Baldor Reliance General Purpose Nema Invertor Motor (30.9% similar) Shipping as it is quoted for the lower 48 states excluding AK, hi and all us protectorates APO. Your phone number is required for contact prior to delivery purposes. If major damage, total loss is present do not accept the delivery but note severe damage and rejected on proof of form prior to ...(September 6th, 2018)
• 29ux45 Baldor Reliance General Purpose Inverter Rated Super Motor (29.5% similar) 13 seer single-package air conditioners and split system heat pumps packaged may not be installed in any state are only sold for replacement parts. Although rare, minor dings and scratches can happen but will not harm the operation of equipment. This listing includes everything you see above. Your...(November 2nd, 2018)